The import/export of points was handled in a standard ASCII format, and data could be exported directly as Autodesk Fieldbook, SmartDraw (.sdr) or LandXML files, Shapefiles or DXF files. I was also able to import both AutoCAD DXF files (intelligent files used in calculations and stakeout) and image files.
Sokkia gps gcx4 work with field genius software#
The software allowed me to create these entities in the field or use LandXML functionality to import them from a CAD program. Horizontal and vertical offsets to the alignments and slope staking were all supported. Stakeout options included single points, lists of points or lines, alignments (located in the Roading module) and surfaces. The Staking routine contained all the staking commands I expected from a full-featured data collection program. While the map screen had a great deal of functionality, it was well designed and uncluttered. MicroSurvey made the measurement button larger than any other button, so taking a shot was simple. A button allowed me to select side shot, traverse, offset, or multiple sets as well as resection or observe bench-mark routines. A Topo toolbar along the bottom portion of the screen contained buttons for automated line work, descriptions and point numbers. Tapping returned the system to the map screen. Pressing took me to the main menu where I was able to find project settings, stakeout details, road information, import/export commands and other functions. Here, I was able to choose what type of shot I wanted to take, set the target height, edit the description and perform other related functions. The program was able to accommodate setting an azimuth and storing the backsight point or using two known points.Īfter my backsight was finished, I was presented with the map screen, which is where most of the work is accomplished (see Figure 2). Once I had my instrument set on a known point, the software prompted me to take a backsight. If you use a third-party radio, I would be sure to test the software before purchasing it. MicroSurvey said that the software has been tested and confirmed to work with Topcon products using Topcon radio systems. Setting the communication timeout to a higher setting seemed to help, but the problem was never completely resolved.
![sokkia gps gcx4 work with field genius sokkia gps gcx4 work with field genius](https://cdn.surveyinstrumentsales.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/f/e/feat_road_module3.png)
![sokkia gps gcx4 work with field genius sokkia gps gcx4 work with field genius](https://www.consurvtech.com/v/vspfiles/photos/S8-PROMO-2T.jpg)
I was using a third-party radio system that had never been tested with FieldGenius, and I had some trouble maintaining a consistent connection with my Topcon GPT 9003 robot. The supported GPS equipment included Leica Novatel, Sokkia, Topcon, Trimble and other NMEA-capable GPS units, and RTN support was available for Leica, Altus, Magellan, Sokkia and Javad. For example, the list of supported total station equipment included Geodimeter, Laser Technologies, Leica, Nikon, Pentax, Sokkia, South, Topcon, Trimble and Zeiss.
![sokkia gps gcx4 work with field genius sokkia gps gcx4 work with field genius](https://us.sokkia.com/sites/default/files/styles/product_gallery_full_normal_1x/public/gcx3-ricevitore-gnss-di-classe-mondiale/gallery/product-gallery-gcx3_01.jpg)
Much of this data only needed to be entered once for the project.įrom there, I was taken to an instrument selection screen that listed virtually every make and model of equipment. I was then prompted to set a coordinate system or bypass this option by selecting. I pressed and proceeded to the setup screen where I was prompted to enter units and format information.
Sokkia gps gcx4 work with field genius serial#
Selecting allowed me to enter crew members, instruments and serial numbers, temperature, pressure, and other information. I was then prompted to select an Automap template file or feature list file, name a raw file, or use the default job name. After starting the FieldGenius application, I was given the option to an existing job or choose to type in a new project name (see Figure 1). Beginning a job in FieldGenius was straightforward and simple.